In this report we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks which you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it is actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll have to cut around the edge of the mask so you get something that looks like a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so that you can make certain that nothing will leak when you put the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a wonderful finished mask to show off to everyone! It’s gas mask for dog also a good idea to wipe away any excess paint once you are done, so you don’t end up with smudges or smears on your dog.
Then it is time to glue the mask onto your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Be certain it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged firmly onto the surface of your dog. Don’t make the folds too big or else it could look messy. Once you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Be sure the ears are flat and be sure that it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask as your dog protection, you will have to do some sanding to be certain it’s safe on your dog. You can do this by sanding off any excess paper which might have been removed from your mask.